An innovative and modular ultrasonic nozzle spraying robot, is a versatile system that can be used either as a desktop or a gantry system, allowing users to create their workstation. The strength of the Sonaer robot lies in its ability to create its own working area, enabling the system to be mounted to any work surface. The system is suitable for use on any type of platform requiring a gantry type mounting with open access under the robot. It is also ideal for conveyor fed automation or can be installed in work cells operating as a slave robot. Sonaer's sonic spraying robot is ideal for coating substrates, medical cartridges, BCT vials or experimental spray coatings for research at an afordable price. The robot comprises a control module, a teach-pendant and an articulated-gantry and is available with Widows based software for writing spraying routines. The basic robot has a working area of 8" x 8" (200 x 200mm) with a resolution accuracy of 0.001mm. Using the teach pendant, the spraying robot holds up to 100 programs (400,000 points). Other robot working areas listed below including very large area robots used with atomizer nozzle arrays. Inquire for robots not shown. Features
Place-anywhere gantry design, allows flexible operationHigh resolution 0.001mm Performs continuous path and point-to-point motions Eight I/O ports for triggering atomizer generator, valves, pumps, gas supplies, convetors Software tip alignment routine for quick program offsets when changing atomizer nozzles Step-and-repeat functions - program one object only for multiple identical objects On board 100 programs, 400,000 point memory capacity, 4,000 points per program Available without Teach Pendant for multiple installations USB connector allows system updates and program interchange between robots Specifications XYZ Robot Working Area/ mm: 200 / 200 / 50 to 800 / 1000 / 200 Total load - Z axis: 2kg to 5kg Max. Speed X&Y / Z (mm/sec): 500 / 300 Repeatability: +/- 0.02mm/ Axis Resolution: 0.001mm/ Axis Data Memory: 100 programs,4000 points/program Drive System/Stepping Motor: Micro stepping motor Motion Control: PTP & CP Teaching Method: Teach Pendant I/O Signals: 8 Inputs / 8 Outputs to 32 / 32 External Interface: USB / RS232 Power Supply: 110/220V Dimensions (WxDxH) mm: 469 x 389 x 499mm Weight: 44 lbs (20 kg) |